Hi D3m0n,
I flashed my SB6120 with ForceWare firmware via BCUSB V1.8 in SPI mode. Sometimes, the Console tab of the software shows "Flash data does not contain proper firmware format". To solve this problem, I try to reflash the backup file at SPI Flash tab. After that flashing process has finished, I will see the new tab which allows me to select the firmware to flash the modem. When that process goes to 46%, it will halt and show "New firmware successfully installed". Is there any problem with my modem?
During the flashing process, I saw the Receive and Send lights are on blue. After that flashing process, I removed the clip and the ISP test pin from the modem. I saw these 2 light are still existed and the Link light is on blue. Do you know what the problem is with my modem? I tried to connect the modem with my computer, but I can't ping that modem via 192.168.100.1 ...It shows request timed out.
Thanks for your kind help.
I flashed my SB6120 with ForceWare firmware via BCUSB V1.8 in SPI mode. Sometimes, the Console tab of the software shows "Flash data does not contain proper firmware format". To solve this problem, I try to reflash the backup file at SPI Flash tab. After that flashing process has finished, I will see the new tab which allows me to select the firmware to flash the modem. When that process goes to 46%, it will halt and show "New firmware successfully installed". Is there any problem with my modem?
During the flashing process, I saw the Receive and Send lights are on blue. After that flashing process, I removed the clip and the ISP test pin from the modem. I saw these 2 light are still existed and the Link light is on blue. Do you know what the problem is with my modem? I tried to connect the modem with my computer, but I can't ping that modem via 192.168.100.1 ...It shows request timed out.
Thanks for your kind help.