stefan_hollenbach
New Member
I try to revive a MSI H61-E33 with Winbond W25Q64BV chip.
The first step was flashing the SPI-Firmware on the BlackCat. Works fine.
After that, pinning the cables on the pins of the JSPI1-Interface on the motherboard with the programmer, but it does not detect the chip. (Build 330, Windows 7x64)
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Home Premium (32 bit)
Device connected in SPI mode, firmware version: 3,05
Unable to connect to compatible SPI device
Device connected in SPI mode, firmware version: 3,05
Unable to connect to compatible SPI device
The first step was flashing the SPI-Firmware on the BlackCat. Works fine.
After that, pinning the cables on the pins of the JSPI1-Interface on the motherboard with the programmer, but it does not detect the chip. (Build 330, Windows 7x64)
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Home Premium (32 bit)
Device connected in SPI mode, firmware version: 3,05
Unable to connect to compatible SPI device
Device connected in SPI mode, firmware version: 3,05
Unable to connect to compatible SPI device
![msi-jspi1.png](http://www.h84.net/bilder/msi-jspi1.png)