I think I'm not able to modify the modem at all, if the first backup and the one you asked me to make as it is, are exactly the same, then I'm not able to write anything to the flash. I have tried unchecking the verify option also but don't see any change when I go to address 0x040000, it should say "forceware"somewhere around there right. It is as if I don't have writing privilages and just read only access. However if the flash is untouched how come I no longer can access 192 site, I compared my 1st backup and a latest backup after doing a lot of things on the modem supposely, but they are perfect match from start to end.
Do you know a way to "factory reset" this modem? Like when you reset the TSOP on SB51XX by short circuit, is there something similar that makes the modem gets its default settings back as it seems I still have a good flash.
With the SBV6220.bcs script there is "Full" Read Area that makes a 16MB dump, don't see how this will be relevant since there is no write option for flashing it back or if this modem only has 8MB but will upload it anyways. Also I was able to compare it with my first backup and for the first 8mb they are exactly the same and after that my hex editor detect it as "inserted" but looking at them careful it is another exact copy of the first 8mb.