• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

SBV6220 & Blackcat Problem

You just need either the clip or you can solder the cables to the SPI chip yourself
 
I told you before look in the documentation folder of the software release ,, there is a PDF there , i suggest you read that first before you attempt anything
 
That did not make much sense , but basically one you get the clip it is a matter of connecting it to SOIC-16 on the PCB of the device , connecting the ISP or VCC to the pin and seeing it it detects.
 
Awww thanks for your help I never done this the sb5101 was all set I just had to do the settings
 
You do realize , you may actually be getting the clip and not be able to modify this modem to what you want , i do not believe there is any CFW for this device.
 
Ahh ok , then you will need the clip , unless you have good soldering skills
 
You already have the Chip that is on the PCB, what you need is the connection from your BCUSB to the chip hence the clip or solder wires between the two.
 
You must log in or register to reply here.
Back
Top