Still not conneting. Mine is W25Q64FVSIG your list says it supports the BV version but dose not include the FV in the list, If that is that causes the problem. Here is my console output file.
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows XP Home Edition (32 bit)
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (JEDEC: 00 0000)
For read write support email
contact@embeddedcomputers.net with JEDEC ID
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (JEDEC: 00 0000)
on the main screen it says unsupported spi device
The first is without the jtag wire enabled second is with the Jtag vcc enabled. I think the whole chips is earse live update upated in windows 8 automatically. Any assistance would be greatly appreciated.