LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 150
Welcome to Blackcat USB interfacing software, build: 275
Running on: Microsoft Windows XP Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 6,03
Engine setup successfully
Detected CPU ID: 0x635817F IMP CODE: 0x818904
Manufacturer ID: 0xBF Part ID: 0x6358
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script
Loading script: default.bcs
Flash device detected: AMD S29GL320 (16777216 bytes)
Located at memory address: 0x1F000000
Programming mode: AMD (16 bit)
Setting device parameter (AMD Flash delay) to 0x1F4
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 150
Welcome to Blackcat USB interfacing software, build: 281
Running on: Microsoft Windows XP Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 6,03
Engine setup successfully
Detected CPU ID: 0x635817F IMP CODE: 0x818904
Manufacturer ID: 0xBF Part ID: 0x6358
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script
Loading script: default.bcs
Setting device parameter (AMD Flash delay) to 0xFA
Setting device parameter (Memory Read Delay) to 0xFA
Script file (default.bcs) unloaded
Loading script: HG556a.bcs
Manufacture ID: 0x01 Part: 0x00227E
Detected Spansion S29GL Family
Cycle 1: 1
Cycle 2: FF
Cycle 3: FF
Cycle 1: 7E
Cycle 2: 21
Cycle 3: 1
Cycle 1: 1
Cycle 2: FFFF
Cycle 3: FFFF
Cycle 1: 7E
Cycle 2: 21
Cycle 3: 1
Failed to add memory device (init failed)
Setting device parameter (AMD Flash delay) to 0x1F4
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 150
Welcome to Blackcat USB interfacing software, build: 281
Running on: Microsoft Windows XP Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 6,03
Engine setup successfully
Detected CPU ID: 0x635817F IMP CODE: 0x818904
Manufacturer ID: 0xBF Part ID: 0x6358
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script
Loading script: default.bcs
Manufacture ID: 0x01 Part: 0x00227E
Detected Spansion S29GL Family, ID: 0x7E2101
Flash device detected: Spansion S29GL256M (16.777.216 bytes)
Located at memory address: 0x1F000000
Programming mode: AMD (16 bit)
Setting device parameter (AMD Flash delay) to 0x1F4
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 150
Welcome to Blackcat USB interfacing software, build: 281
Running on: Microsoft Windows XP Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 6,03
Engine setup successfully
Detected CPU ID: 0x635817F IMP CODE: 0x818904
Manufacturer ID: 0xBF Part ID: 0x6358
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script
Loading script: default.bcs
Manufacture ID: 0x01 Part: 0x00227E
Detected Spansion S29GL Family, ID: 0x7E2101
Flash device detected: Spansion S29GL256M (16.777.216 bytes)
Located at memory address: 0x1F000000
Programming mode: AMD (16 bit)
Setting device parameter (AMD Flash delay) to 0x1F4
Address 0x2020: wrote 0xB5 and read 0xFF (2 mismatches)
Address 0x2020: wrote 0xB5 and read 0xFF (10 mismatches)
Address 0x2020: wrote 0xB5 and read 0xFF (6 mismatches)
Error: data verification at 0x0 failed!
Address 0x2A0CC: wrote 0x6E and read 0xFF (8 mismatches)
Address 0x32632: wrote 0x69 and read 0xFF (4 mismatches)
Address 0x2D450: wrote 0xE1 and read 0xFF (4 mismatches)
Error: data verification at 0x20000 failed!
Address 0x428FE: wrote 0x7E and read 0xFF (22 mismatches)
Address 0x40610: wrote 0xA3 and read 0xFF (24 mismatches)
Address 0x407B2: wrote 0x32 and read 0xFF (20 mismatches)
Error: data verification at 0xC0000 failed!