Is there any way FlashcatUSB can be used to program this flash?
On the chip manufacturer is "ST" but datasheat that I found is "Micron", probably merged company's.
http://pdf1.alldatasheet.net/datasheet-pdf/view/526217/MICRON/M25PX16SOVZM6TP.html
Thanx
Features
SPI bus compatible serial interface
75 MHz (maximum) clock frequency
2.3 V to 3.6 V single supply voltage
Dual input/output instructions resulting in an
equivalent clock frequency of 150 MHz:
– Dual Output Fast Read instruction
– Dual Input Fast Program instruction
16 Mbit Flash memory
– Uniform 4-Kbyte subsectors
– Uniform 64-Kbyte sectors
Additional 64-byte user-lockable, one-time
programmable (OTP) area
Erase capability
– Subsector (4-Kbyte) granularity
– Sector (64-Kbyte) granularity
– Bulk Erase (16 Mbit) in 15 s (typical)
Write protections
– Software write protection applicable to
every 64-Kbyte sector (volatile lock bit)
– Hardware write protection: protected area
size defined by three non-volatile bits (BP0,
BP1 and BP2)
Deep Power-down mode: 5 μA (typical)
Electronic signature
– JEDEC standard two-byte signature
(7115h)
– Unique ID code (UID) with16 bytes readonly,
available upon customer request
More than 100 000 write cycles per sector
More than 20 year data retention
Packages
– RoHS compliant
Automotive certified parts available
On the chip manufacturer is "ST" but datasheat that I found is "Micron", probably merged company's.
http://pdf1.alldatasheet.net/datasheet-pdf/view/526217/MICRON/M25PX16SOVZM6TP.html
Thanx
Features
SPI bus compatible serial interface
75 MHz (maximum) clock frequency
2.3 V to 3.6 V single supply voltage
Dual input/output instructions resulting in an
equivalent clock frequency of 150 MHz:
– Dual Output Fast Read instruction
– Dual Input Fast Program instruction
16 Mbit Flash memory
– Uniform 4-Kbyte subsectors
– Uniform 64-Kbyte sectors
Additional 64-byte user-lockable, one-time
programmable (OTP) area
Erase capability
– Subsector (4-Kbyte) granularity
– Sector (64-Kbyte) granularity
– Bulk Erase (16 Mbit) in 15 s (typical)
Write protections
– Software write protection applicable to
every 64-Kbyte sector (volatile lock bit)
– Hardware write protection: protected area
size defined by three non-volatile bits (BP0,
BP1 and BP2)
Deep Power-down mode: 5 μA (typical)
Electronic signature
– JEDEC standard two-byte signature
(7115h)
– Unique ID code (UID) with16 bytes readonly,
available upon customer request
More than 100 000 write cycles per sector
More than 20 year data retention
Packages
– RoHS compliant
Automotive certified parts available