How-To flashing Haxorware with BlackCatusb v1.7
Id like to thank D3m0n for all his help, helping me
things needed:
blackcatusb v1.7 (programmed to spi mode)
sb5101U script (thanks to D3m0n)
some soldering skills or a test clip
an external 5v power source
(the whole process does not require you to power the modem via power adapter)
first solder the 6 wires to the spi chip
(as picture states...exclude the hold# wire as i found it not neccesary)
second solder wires to the ISP
third Connect soldered wires to BCusb
now connect usb cable to BCusb
jump the ISP
now apply the external 5v power source to the VCC wire
load sb5101U script
AND BACKUP UP EVERYTHING
start up the blackcat software
disconnect usb cable from BCusb, remove the 5v power source and disconnect ISP
now plug in power adapter to modem and
then flash haxorware in the 5101 tab
thats all your done....test!
Id like to thank D3m0n for all his help, helping me