• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

TSOP56/48 NOR/NAND Clip Adapters for the FlashcatUSB xPort

Zeigren,
What is the difference between TSOP48 NOR X8, TSOP48 NOR 16X, TSOP48 NAND ? Which one works with TC58NVG0S3ETA00?
 
ricktendo,
Thank you for taking your time to help me out. I have ordered the 8x although the link you provided is not for the 8x. I believe you are right, the 8x is the one I need. Let's see how it goes... Thank you again!
 
The link I provided should work on both the x8 and x16, it is the ONLY NAND type adapter.
 
So, I finally got the time to play with the new toys ( Mach1, FCCA TSOP48 X8, FCCA PSU, and uni-48-clip)
I did not get far lol. Sometimes, As soon as I connect the PSU to the mach1, the lights of the PSU turn off and I get a msg on my PC of USB power issues. After playing a bit more, the mach1 and the psu started turning off when I clipped the TC58NVG0S3HT A10.

If I use the "old" xport and zeigren's TSOP48 NAND UNI (TYPE B) ADAPTER (360 clip) it works fine. On the website, non of the new adapters match the pinout of the picture I attached which is the pinout here https://docs.zeigren.com/books/flashcatusb-clip-adapters/page/tsop48-nand-uni-(type-b)-adapter
I hope it all makes sense... One million Thanks!!
 

Attachments

  • TSOP48 NAND UNI (TYPE B) ADAPTER.JPG
    TSOP48 NAND UNI (TYPE B) ADAPTER.JPG
    44.6 KB · Views: 19
"FCCA TSOP48 X8"
Did you get the NORX8 or the NAND adapter?

The pinout for the new NAND adapter is compatible it just has a lot more signals. In this case these would be the Async pins in this picture
NAND-X8.jpg


Does the power supply work on its own (not connected to the Mach1) if you set the output voltage with the buttons? It might flutter around before you press a button since the ADC pins will all be floating.

Also I recommend connecting the FlashcatUSB, clip adapter, and PSU together first. Then plugging the USB Type-C cable into the power supply, and then plugging the USB cable into FlashcatUSB. Do the reverse when you're disconnecting everything.

Oh yeah turns out the forum notification emails were getting sent to spam. So I should be better about responding here now.
 
I bought the NORX8.
Should I have bought the NAND adapter below?

Thanks
 
I bought the NORX8.
Should I have bought the NAND adapter below?

Thanks
Email the seller and ask for exchange, since they both cost the same all you would need to do is pay shipping.
 
Back
Top