pm25lv010. I can not flash

[jera]

This flash memory is present in the list of supported , tell me what mode it is necessary to program. I have read it , and is programmed with an error

 

[D3m0n]

Is the chip identified properly in FCUSB ? What error do you get when programming ?

 

[jera]

I'll start with the fact that Flash is not determined by the programmer in automatic mode , and in mode SPI nRF24LE1 defined as a kind of compatible device. error code will not say because this is not at work.

 

[jera]

pm25lv512 with the same problem

 

[D3m0n]

What is reported by the software when it is connected to these chips ? Also how are you connecting to the chips ,can you provide some photos and screenshots please.

 

[jera]

thanks for efficiency , I have now no programmer , he in the office , on Monday I can send detailed screenshots. thanks again.

 

[D3m0n]

No worries as soon as you have the information ,post here and we will see if we can resolve it.

 

[jera]

attach screenshots with my problem

 

[D3m0n]

Can you post a picture of your connection to the chip please , as this specific chip is supported , so it leads me to believe there is a connection issue to the chip.

 

[jera]

He identified the reason why the memory has not been determined . programmable only with software version 338. possible to fix this problem in newer versions

 

[jera]

also possible to add support EN25F32
In manual mode, it reads and writes , and auto-negotiation not working