• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

please suport for this flash

Are you using the Zeigren in circuit adapter to detect this flash , or have you removed it from the board and put it into an embedded adapter ?
 
Are you using the Zeigren in circuit adapter to detect this flash , or have you removed it from the board and put it into an embedded adapter ?
He is using the Zeigren in circuit adapter but I am more than sure that the problem is not the adapter but the 360 Nand Clip that doesn't make good contact with chip, it looks like the 360 Nand Clip it a little bigger than the chip.
 
Can you share close ups of your adapter and clip , so we can see if we can spot an issue.
Are you just using Zeigren's NAND adapter or are you using his added power supply adapter as well ?
 
i have the 2 adapter with the flashkat x port the chip i try to detec is supported in the list but all i can get flash memory detecte but not found in flash memory with the 2 adapter from zegran like 4 box no power on amazingIMG_5919.JPG
 
i check
index.php
the the flash supported list and i dont see this flash toshiba in the list please any help
 
Make sure the clip is flush with the chip, you may have to shave some plastic off the side of the 360 clip so that it will get around components or unpopulated component pads that have solder on them like this one I marked bellow

IMG_5883.JPG

Also it does not hurt if you clean the pins off with a brush and some isopropyl alcohol
 
Recently bought flashcatusb classic PCB2.1 and updated with latest firmware (4.40)
Need flashcatusb support for winbond 25q64fvsig (Motherboard MSI Z77A GD55)
 
Last edited:
Recently bought flashcatusb classic PCB2.1 and updated with latest firmware (4.40)
Need flashcatusb support for winbond 25q64fvsig (Motherboard MSI Z77A GD55)

No need to hijack a thread that has nothing to do with the specific flash you want, start a new thread. Plus this chip is already supported.
 
Back
Top