• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.
  • Seems like hotmail /outlook is blocking emails from here so please refrain from using one of these accounts as you may not receive your authorization email.. many thanks

FlashcatUSB xPort


Staff member
  • Compatible with the FlashcatUSB Classic software and API

  • Fast 16MHz RISC processor with 64KB of internal memory

  • USB 1.1 / 2.0 / 3.0 / 3.1 compatible

  • External voltage regulator with 3.3V and 5V output

  • Upgradable firmware over USB

  • On board reset button (reset and bootloader mode)

  • All standard extension port sockets are compatible

  • Supports both NOR (x8 / x16) and SLC NAND (x8) devices.

  • Address and data I/O: (A0 to A27) and (DQ0 to DQ15)

  • Supports 512Mbit, 1Gbit and 2Gbit NOR Flash devices
This USB Flash memory programmer is designed for reading and writing to parallel memory devices. Built using the FlashcatUSB Classic core, it combines both the FlashcatUSB and the Extension Port into a single board solution. This allows the xPort programmer to be very compact, low priced, twice as fast, and easy to use.




Staff member
If you follow the link to the embeddedcomputers site , it will show you a list of supported NOR and NAND flashes