• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

5101U script???

am a cable network maintenance personnel

I have a modem SB5101U are companies that offer to repair

amplifiers and optical calibration node

Now I just want to copy to add a modem

generally two modem with a Mac address

convenient to my work



Nghe
 
Modem A
modem is using
A.JPG

Modem B
B.JPG

I copied the modem SPI Flash (A) copy for the modem (B)
now address Mac modem (B) the same modem (A) but not used
help me?
 
That is stock firmware on there , this will not allow you to alter any settings , you need modified firmware for this modem , google Haxorware and you will find sites that have the needed firmware , then you just have to flash this to the modem.
 
I tried this with DIAG.bin haxorware11rev39 after address changeMac serial number ...
adjust the frequency, ID ...

Results modem (B) still do not use the (not online)

 
This is something this forum does not deal with , basically getting your device flashed is as far as i can help you with , in order to get your device online , you will have to look into modem hacking sites , but i can tell you this , with the newer security about on most ISP's , you cannot just change a serial# and HFC , you need the correct/relevant certs for that HFC , the minute you alter a HFC mac on a device , you break the chain cert. Google sbhacker i believe they deal more with these issues.
 
Demon do you know if is posible to stablish communication with this device by serial console with max232 ????



any diagram out there?
 
It should be possible , looking at the photo of the board there seems to be TTL holes next to the SPI chip , but as i do not have one of these devices i could not tell you the layout.
 
Hax tab will load the firmware you mentioned firmwareand firmware 1 are for stock images
 
Back
Top