adami
New Member
Hello guys,
The hardware detects my nand as TC58NVG0S3HTA00 and then does not allow to read and write correctly, any suggestions?
Successfully detected device in SLC NAND mode
Connected to Flash (CHIP ID: 0x98F1801572)
Flash detected: Toshiba TC58NVG0S3HTA00 (134.217.728 bytes)
Programming mode: EXT I/O (Parallel)
Flash page size: 2048 bytes (128 bytes extended)
NAND interface: X8 3.3V
Loading NAND memory map for valid memory
BAD NAND BLOCK at page index: 0x000CC0 (block index: 51)
BAD NAND BLOCK at page index: 0x00C000 (block index: 768)
NAND memory map complete: 65.408 pages available for access
The hardware detects my nand as TC58NVG0S3HTA00 and then does not allow to read and write correctly, any suggestions?
Successfully detected device in SLC NAND mode
Connected to Flash (CHIP ID: 0x98F1801572)
Flash detected: Toshiba TC58NVG0S3HTA00 (134.217.728 bytes)
Programming mode: EXT I/O (Parallel)
Flash page size: 2048 bytes (128 bytes extended)
NAND interface: X8 3.3V
Loading NAND memory map for valid memory
BAD NAND BLOCK at page index: 0x000CC0 (block index: 51)
BAD NAND BLOCK at page index: 0x00C000 (block index: 768)
NAND memory map complete: 65.408 pages available for access