partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
partitions[3] = {.name = UBFI1, .offset = 0x00040000,.size = 0x007b0000 (7872K) }
partitions[4] = {.name = UBFI2, .offset = 0x007f0000,.size = 0x007b0000 (7872K) }
partitions[5] = {.name = Kernel, .offset = 0x00040f98,.size = 0x00101068 (1028K) }
partitions[6] = {.name = RootFileSystem, .offset = 0x00142000,.size = 0x00462c00 (4491K) }
partitions[7] = {.name = nvram, .offset = 0x00fb0000,.size = 0x00050000 (320K) }
Creating 8 MTD partitions on "spansion":
0x00000000-0x00020000 : "U-Boot"
0x00020000-0x00030000 : "env1"
0x00030000-0x00040000 : "env2"
0x00040000-0x007f0000 : "UBFI1"
0x007f0000-0x00fa0000 : "UBFI2"
0x00040f98-0x00142000 : "Kernel"
mtd: partition "Kernel" doesn't start on an erase block boundary -- force read-o nly
0x00142000-0x005a4c00 : "RootFileSystem"
mtd: partition "RootFileSystem" doesn't start on an erase block boundary -- forc e read-only
0x00fb0000-0x01000000 : "nvram"
Serial Flash [Bus:0 CS:1] : No device found
ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage