BCUSB PCB 1.8 not working

[skyline629]

I think my PCB 1.8 is not working or bricked. It won't detect any flash at all. When I try with my other PCB 1.5, with the same modem and cable. It works fine. Is there a how to fix my BCUSB?

Thanks,

Here is my log:
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 150
Welcome to Blackcat USB interfacing software, build: 281
Running on: Microsoft Windows XP Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7.02
Error connecting to target board
Initializing EJTAG engine
Error: failed to retrieve board firmware version

 

[Pantheon]

You MUST be using build 3xx+ for RC15 software/firmware.

 

[D3m0n]

There is nothing wrong with your bcusb board , use the latest software and firmware and it will work,
what you are doing above is using an older version of the software with the newer version of firmware which will not work.

 

[jason]

http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3886
upgrade drivers on your computer also. better safe than sorry