flashcatusb

The EEPROM is detected, and I can read the contents. The device is NOT write protected. The "Erase all memory" command appears to execute, but only erases a very small amount of the memory (see the FFs in the above screen capture). BUT Most importantly, I cannot program a file into the...

I am using purchaged FlashCatUSB Mach with In-circuit TSOP-48 NAND X8 clip. That's my Console.log: Please help me reading this Flash.

Hi there, I’m trying to use a FlashcatUSB XPORT (PCB 2.0) with TSOP-56 socket to program a parallel NOR flash (Cypress S29GL128P). Reading memory is working without problems, also the Test Pattern script with pattern 1 and 2 works. But if I generate a binary file, for example with this test...

Windows 10 doesn't detect it and it isn't under other devices in device manager. I followed the guide. So I tried just installing it via action as "legacy software" and it installed but the tool from the zip file doesn't detect the FlashCat as being connected. What am I doing wrong? I thought...

Hello, i am having issues with the pinout for the sb6121 and a flashcat 2.1, i already have tried all the options i was able to find on the internet for the pinout but im not able to detect them. So far what im doing its in the attached files I havae tried with external power for the vcc (the...