Hello,
Got a fresh PCB 2.1 v371 to flash an MXic MX25L8005 . But chip is not in SPI db.
Complete chip spec here : http://www.macronix.com/en-us/Product/Pages/ProductDetail.aspx?PartNo=MX25L8005
fcusb log is :
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 225
SPI database loaded: 226 devices supported
Welcome to FlashcatUSB interfacing software, build: 371
Running on: Microsoft Windows 10 Professionnel (64 bit)
Device connected in SPI mode, firmware version: 4,06
Successfully opened device in SPI mode (8 MHz)
Connected to Flash (RDID:0xFFFFFF REMS:0xFFFF)
For read write support email contact@embeddedcomputers.net with RDID/REMS
RDID should be : C2 2014 and REMS should be C2 13 (see page 16 datasheet).
FCUSB is set to 3,3v (normal range for that chip).
Chip' 8-PIN PDIPD (300mil) is same as FCUSB diagram for a typical SOIC-8 and DIP-8 package of a SPI compatible Flash device.
Chip is connected thru 3M SOIC clip.
Any chance to get my "Blackcat USB SPI I2C JTAG Flash Programmer SPANSION MXIC Winbond Microchip ATMEL" work with my chip ?
Thx
polo
Got a fresh PCB 2.1 v371 to flash an MXic MX25L8005 . But chip is not in SPI db.
Complete chip spec here : http://www.macronix.com/en-us/Product/Pages/ProductDetail.aspx?PartNo=MX25L8005
fcusb log is :
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 225
SPI database loaded: 226 devices supported
Welcome to FlashcatUSB interfacing software, build: 371
Running on: Microsoft Windows 10 Professionnel (64 bit)
Device connected in SPI mode, firmware version: 4,06
Successfully opened device in SPI mode (8 MHz)
Connected to Flash (RDID:0xFFFFFF REMS:0xFFFF)
For read write support email contact@embeddedcomputers.net with RDID/REMS
RDID should be : C2 2014 and REMS should be C2 13 (see page 16 datasheet).
FCUSB is set to 3,3v (normal range for that chip).
Chip' 8-PIN PDIPD (300mil) is same as FCUSB diagram for a typical SOIC-8 and DIP-8 package of a SPI compatible Flash device.
Chip is connected thru 3M SOIC clip.
Any chance to get my "Blackcat USB SPI I2C JTAG Flash Programmer SPANSION MXIC Winbond Microchip ATMEL" work with my chip ?
Thx
polo